 |
 |
 |
 |
 |
 |
 |
 |
Instructions
Applying your new vinyl is easy, once you know how.
Here is a step-by-step tutorial
on how to put it up right the first time,
just like a professional!
 |
 |
|
| 1. Clean the area you want to apply the lettering to. | 2. Measure where the
lettering |
|
 |
 |
|
| 3. Tape the text through
the center. It doesn't have to be exact. |
4. Pull up the right side. | |
 |
 |
|
| 5. Slowly peel of the
backing of the right half. |
6. Cut the backing off the right half. | |
 |
 |
|
| 7.
Gently lay the exposed letters back onto the surface, starting at
the center working outward. Avoid wrinkles and bubbles. |
||
 |
 |
|
| 8. Go back over the letters using a stiff card (credit card) to securely fasten to the surface. | ||
 |
 |
|
| 9. Remove the tape. | ||
 |
 |
|
| 10. Pull back the left side. | 11. Peel the backing off
the left side. |
|
 |
 |
|
| 12. Gently lay the left side back onto the surface, starting from the center moving outward. | ||
 |
 |
|
| 13. Avoid bubbles and wrinkles. | 14. Go over the left side with a stiff card, fastening securely. | |
 |
 |
|
| 15. With your card, work
out any bubbles to the edge of the lettering. |
||
 |
 |
|
| 16. Remove the backing. | ||
 |
 |
|
| Enjoy! | ||
| Note: MitchellCreations.com is our sister site. | ||
Contact Us
email:
JanaMitchell @Yahoo.com
phone:
(706) 394-3358
Grovetown, GA